Instructions On How to Use the Irontite Ceramic Seals
It is important to understand that the irontite ceramic seals are very crucial to the people who understand their use in the cooling system. The vehicles are just like the body of a human being and need to be maintained for proper functioning. For a car to work well, there are so many things that must be in place. The engine and the cooling systems can become extremely hot and may require cooling.
The irontite ceramic seals are necessary for coating the cooling system in the engine. You need to understand the importance of cleaning the engine before applying this product. It is essential to have in mind that the thoro-flush is essential in doing the cleaning. You need to understand that there is a guideline that should be followed when applying the irontite ceramic seals on the cooling system. Here is what you need to do.
One needs to understand that the initial step in the coating of the cooling system should be cleaning and draining it. The industrial irontite thoro-flush is the product recommended for use here. You should learn that clean water is used together with this product. Make sure to rinse the system more than once to ensure that it is dust-free. The next thing that you are supposed to do is filling water and the product into the radiator. It is advisable that you cap the hose directly into the radiator through the mouth. This idea is only applicable for vehicles that do not have the pressurized radiator caps. One is supposed to have in mind that the bottle containing the product will then require proper shaking. It is necessary to learn that water and the ceramic seal are then filled into the coolant system. It is required that soft and clean water be used here to avoid problems with corrosion.
The ceramic seal will stain the required parts. Make sure to clean any stains on the cap and the neck of the radiator. Once cleaned the caps should be returned in place. The next thing that you are supposed to do is filling the overflow tank with water and then starting the vehicle. Run the engine for at least one hour before flushing it with water. For the system to dry, it is advisable that you open it and leave it for a minimum of 12 hours. You are supposed to know that a coolant mixture should then be added into the system to make it leak-proof.